Bedding Pillars
Correctly pillar bedding a rifle will improve its accuracy. Read about why here.
All our pillars are CNC machined from aluminum for the highest precision. The pillar must be cut to length (with the exception of the specific Ruger 10/22 pillar), and are long enough for all installations. The roughened finish on the outside of the pillar increases the surface area the bedding epoxy can bond to, providing a more secure installation.
The inside diameter of the pillar (hole) is = 0.260", which can accomodate up to a #14 bolt (1/4") or a M7 metric bolt freely.
7/16" Bedding Pillar
0.430" OD, 0.260" ID, 1.800" Length
Cut to length pillar:
Nominal outside diameter = 7/16" , actual outside diameter is slightly smaller to allow it to freely fit into a 7/16" hole.
$7.29 $6.39
Buy it now
Ruger 10/22 specific pillar
CREATED FOR THE RUGER 10/22. The pillar can be placed directly under the escutcheon (brass fitting) that the stock screw fits into. The diameter of the pillar is the same as the escutcheon, making installation easier to perform.
Dimensions:
0.430" OD, 0.260" ID, 0.500" Length
$6.89
Temporarily unavailable
1/2" Bedding Pillar
0.480" OD, 0.260" ID, 2.200" Length (Cut to length)
Nominal outside diameter = 1/2" , actual outside diameter is slightly smaller to allow it to freely fit into a 1/2" hole.
$7.39 $6.49
Buy it now
5/8" Bedding Pillar
0.605" OD, 0.260" ID, 2.200" Length
Nominal outside diameter = 5/8" , actual outside diameter is slightly smaller to allow it to freely fit into a 5/8" hole.
$7.59
Temporarily unavailable
Pillar Combination Kits - 1/2" and 7/16"
A combination of our most popular pillars, the cut to length 7/16" and 1/2" diameter pillars.
$9.89 $8.59
Buy it now